Installation of graphics art presses

Goodhart Sons Inc. Completes Fabrication and Installation of VAM Emissions Control Abatement System

October 10, 2013 - Goodhart Sons, Inc., a steel fabricator and installer in Lancaster, PA. was contracted by a pollution control equipment supplier to provide the detailing, fabrication, shipping and installation of a VAM Emission Control Abatement System.

The project consisted of the fabrication and installation of structural steel, equipment, ductwork, exhaust stacks, platforms and piping of the entire system including the pyroblock of the pollution control equipment. Goodhart Sons, Inc. used over 40 tractor trailer loads to move the fabricated items from their fabrication site in Lancaster, PA. to the mountains of West Virginia for installation. 

Read more of this news release Download a PDF

Fabrication & installation of pollutuion control and recycling equipment

Goodhart Sons Inc. Contracted for Fabrication and Installation of Molybdenum Recovery Plant

September 23, 2013 - Goodhart Sons, Inc., a steel fabricator and installer in Lancaster, PA. was contracted by a newly-formed mid-west Molybdenum recycling company to perform the design, fabrication, freight and installation of the structural steel tower and a series of water-cooled jacketed vessels that serve as the show piece and heart of this new plant.                        

Goodhart Sons, Inc. then went on to receive the complete balance of the plant installation contract, the air pollution control installation contract as well as miscellaneous fabrication contracts for additional bins and tanks.

 

Read more of this news release Download a PDF

Fabrication & installation of pollutuion control and recycling equipment

Goodhart Sons Inc. Expands Safety Program

August 15, 2013 - Goodhart Sons, Inc., a steel fabricator and installer in Lancaster, PA. continues to invest in an unyielding commitment to the success of their safety program.                        

Steve Weisser, theSafety Health Manager at Goodhart Sons, Inc., has recently taken and successfully passed OSHA Safety Certification Course #510 1926.

The training was completed thru the United States Department of Labor, Mid Atlantic OSHA Training Institute Education Center. This Course covers all OSHA policies, procedures, standards, and safety & health principles in the Construction Industry fields.

“It is our mission to not only continue our education as it relates to safety, but to share the knowledge gained in order to promote a safe and healthy working environment”, says Weisser.

 

Read more of this news release Download a PDF

Committed to work place safety

Goodhart Sons Inc. Announces the Formation of Safety Committee

July 31, 2013 - Goodhart Sons, Inc., a steel fabricator and installer in Lancaster, PA.has announced the formation of an internal Safety Committee. The purpose of the committee is to implement a policy for safety and health that clearly illustrates the company’s approach in providing a safe and healthy work environment.                        

The committee consists of representatives from various areas within the company who will meet on a regular basis to deal with safety and health concerns. They will evaluate the risk of workplace accidentsand make recommendations for accident prevention and safety program activities. The Safety Committee also sets up and promotes programs to improve employee training and education.

 

Read more of this news release Download a PDF

Committed to work place safety

Goodhart Sons Inc. Completes Spray Dryer Expansion Project

June 20, 2013 - Goodhart Sons, Inc., a steel fabricator and installer in Lancaster, PA was contracted by an equipment supply company to perform the fabrication, freight and installation of a structural steel tower for a 40 foot diameter spray dryer and auxiliary equipment.                        

The project consisted of the fabrication and installation of approximately 410,000 lbs. of steelwork. While they are no stranger to working on large structural steel projects, this was the first major project of this magnitude to use their beam drilling line that was installed in December of 2011.

The scope of work also involved the installation of all of the auxiliary equipment for the spray dryer such as cyclones, ductwork, fans etc. A span of 8 months separated  the start of fabrication and  the completion of the installation.

Read more of this news release Download a PDF

 

Spray dryer, platforms and access steel

Goodhart Sons Inc. Revamps Food Equipment During Shutdown

June 10, 2013 - Goodhart Sons, Inc., a steel fabricator and installer in Lancaster, PA. was recently contracted by a food manufacturing company to perform the design, fabrication and installation of six (6) rectangular stainless steel silos including the removal of the existing silos. The fabrication consisted of the six stainless steel silos being polished to the customer specifications and delivery to the job site in Lancaster, PA. The Installation consisted of the mechanical and electrical removal of the existing silos, including electrical connection, during a six-day shutdown period.                        

Goodhart Sons, Inc. is a fully equipped steel fabricator and installer located in Lancaster, PA. with over 175,000 square feet of production space. They are ASME Section VIII, Division I board certified in possession of their R, S and U stamps as well as an AISC Member and are up to the challenge of completing your project with the highest level of quality, on time, and within budget.

Read more of this news release Download a PDF

Fabrication and installation of food process lines

Goodhart Sons, Inc. Among Those Receiving Awards

May 20, 2013 - Goodhart Sons, Inc., a steel fabricator and installer in Lancaster, PA. was recently recognized as a corporate leader and for their support in education.                        

Goodhart Sons, Inc. awards students at both the high school and college levels who demonstrate excellence in the field of metal working.

Marc Goodhart was on hand to receive the Corporate Partner Award from The Thaddeus Stevens College of Technology Alumni Association.

 

 

Read more of this news release Download a PDF

Dedicated towards the education of future generations

Goodhart Sons Inc. To Exhibit At the 67th Annual Pennsylvania Manufacturing Confectioners Association Conference

April 3, 2013 - Goodhart Sons, Inc., a steel fabricator and installer in Lancaster, PA. will be represented at the 67th Annual PMCA Conference by Sam Musolin. The conference will be held at the Lancaster County Convention Center, Lancaster, PA. from April 15-17, 2013.                        

Goodhart Sons, Inc. has extensive knowledge and experience in the fabrication and installation of confectionary equipment such as custom size horizontal and vertical paste tanks, chocolate melters, peanut butter coolers, food storage bins, ovens as well as other confectionary production solutions. They will have an exhibit at booth on Monday, April 15th beginning at 12:30 pm and concluding at 5:00 pm.

 

Read more of this news release Download a PDF

Custom confectionary equipment

Goodhart Sons, Inc. Obtains ASME "S" Stamp

November 5, 2012 - Goodhart Sons, Inc., a steel fabricator and installer in Lancaster, PA. has recently obtained their ASME "S" stamp for the field and shop fabrication of Power Boilers.                        

This latest certification complements the "R", National Board Inspection Code and "U" Section VIII, Division I Stamps that are already in their possession.

Goodhart Sons, Inc. also has the ability to design, fabricate and install to API 650, and API 653 standards, International Building Code, SMACNA Ductwork Construction Standards, AWWA Welded carbon steel tanks for Water Storage and AISC construction standards.

 

Read more of this news release Download a PDF

ASME national board certified

Goodhart Sons, Inc. Adds New Weld Manipulator

October 4, 2012 - Goodhart Sons, Inc. a steel fabricator and installer based in Lancaster, PA., has acquired an additional Pandjiris Manipulator to assist in the manufacturing of tanks, pressure vessels and ductwork. This is the second manipulator they have added in the past 9 months.                        

This time they have decided to go bigger. The manipulator’s basic size of 14' x 14' is mounted on a bolt-down base and has an 1' nominal arc height along with a 14' horizontal boom stroke at a variable speed of 3" to 116" per minute. This is electronically controlled with dynamic braking beginning 19-1/4" from the centerline of the column and 360 degree manual column rotation. The standard electricals are 230/460 volts, 3 phase, 60 cycle with 115 control and is wired to conform to National Electrical Code Standards.

 

Read more of this news release Download a PDF

Goodhart Sons, Inc. advanced welding technology

Goodhart Sons, Inc. Presents Welding Awards

September 10, 2012 - Goodhart Sons, Inc., a steel fabricator and installer in Lancaster, PA. has presented awards to students at the high school and college levels who have displayed excellence in the field of welding.

Each year Goodhart Sons, Inc. presents a bucket of welding tools & supplies to the Outstanding Welding Student at the Lancaster County Career and Technology Center. This year's recipient was Brian Kuhn, a Manheim Township high school student. He plans on furthering his education by attending college.

Josef Hess was the recipient of the Frank G. Goodhart Memorial Award. It was presented in the form a $250.00 U.S. Savings Bond to the Outstanding Metals Fabrication and Welding student at the Thaddeus Stevens College Of Technology. His plans are to seek employment that best utilize his new found skills.

Read more of this news release Download a PDF

Goodhart Sons, Inc. supports educational growth

Goodhart Sons, Inc. Enhances Their 3D CAD Capabilities

August 22, 2012 - Two members of Goodhart Sons, Inc. Engineering Department have participated in and successfully completed a course in Autodesk Inventor Essentials at Synergis Software in Harrisburg, PA. Detailers Sandy Holsinger and Doug Landis took part in a hands-on course that serves as a foundation by covering the workings of Autodesk Inventor.                        

Goodhart Sons, Inc. has been using Autodesk Inventor for several years to check inferences and reduce problems that might have previously been caught in production. "Using 3D Inventor models allows us to quickly, clearly, and accurately solve many design situations and test the conditions in a simulated environment before any steel is cut." says Fabrication Operations Manager Michael Goodhart.

 

Read more of this news release Download a PDF

2D & 3D Cad in house drafting and design

Goodhart Sons, Inc. Expands Welding Capabilities

August 13, 2012 - Goodhart Sons, Inc. a steel fabricator and installer based in Lancaster, PA., has acquired a Pandjiris Manipulator to assist in the manufacturing of tanks, pressure vessels and ductwork.                        

The Series "1200" Manipulator, was original a Series 1100 before being customized by Pandjiris specifically to meet the fabrication needs of Goodhart Sons, Inc.

Its basic size of 12' x 12', is mounted on a bolt-down base and has an 12' nominal arc height along with a 12' horizontal boom stroke at a variable speed of 3" to 116" per minute. This is electronically controlled with dynamic braking beginning 19-1/4" from the centerline of the column and 360 degree manual column rotation. The standard electricals are 230/460 volts, 3 phase, 60 cycle with 115 control. Wired to conform to National Electrical Code Standards.

 

Read more of this news release Download a PDF

Weld manipulator

Goodhart Sons, Inc. Adds To Their Pipe/Tube Forming Capabilities

August 06, 2012 - Goodhart Sons, Inc., a steel fabricator located in Lancaster, PA, has recently updated their pipe/tube forming capabilities with the addition of three new pieces of equipment. A Scotchman notcher, an Ercolina bender and an FMB saw have been added to their fabrication facilities.                        

The addition of a Scotchman Tube/Pipe notcher with top-mounted deburring surface allows Goodhart Sons, Inc. to produce gap-free fits ready for welding with many different mandrels available to complete the task.

Their Ercolina Tube/Pipe Bender is complete with touch screen programming, a quick-change tooling system, digital display of bend angle, material spring back compensation, remote control of bend, return and emergency stop functions, accurate counter bending die positioning and a heavy-duty steel gear case.

Read more of this news release Download a PDF

Pipe Bending Capabilites

Goodhart Sons, Inc. Has Recently Add a Beam Drilling Line

June 18, 2012 - Goodhart Sons, Inc., A steel fabricator and installer in Lancaster, PA. Has announced the purchase of a new Excalibur 12 CNC Beam drilling line.            

The Excalibur 12 CNC Single Spindle Drill by FICEP allows them to greatly reduce the amount time they spend drilling structural steel as well increasing the accuracy and consistency of the parts they produce.

This new piece of equipment features an exclusive secondary "X" axis with improved accuracy and productivity as it is not necessary to unclamp, reposition and re-clamp for each "X" axis (length axis) movement. This capability also permits scribing on all four surfaces to eliminate all manual layout which can be automatically imported from their CAD system files. The secondary axis also provides the ability to generate slotted holes, copes and large holes.

Read more of this news release Download a PDF

Structural steel beam drilling line

Copyright© 2014 Goodhart Sons, Inc.

Like Us on FacebookFollow Us on TwitterConnect with us on LinkedInSee what we're up to on YouTubeRead our Blog

Skip to content